Making use of Concrete Piles
Concrete piles are one of the most common types of piling. They are often used on construction jobs taking place on houses as well as other buildings, meaning that they have a wide range of use.
There are quite a few advantages to using concrete piles, which is one of the reasons they are used so often. For instance, they have a long track record of success that makes them ideal for underpinning foundations. They can also be used straight after being installed and, as they are relatively fast to install compared to some other methods, they make a good option when time is of the essence.
Concrete pilings are designed to last as long as the concrete foundation itself, meaning that they have a long service life. To install them, they are pushed under a foundation into the ground, effectively underpinning the foundation to give it extra support. They are installed by digging a hole next to the foundation, which will normally end around two feet below the bottom of the foundation.
Then the cylinder is placed into the hole and kept in place by using a ram. This process is completed until the space has been filled. Once they have been installed and signed off on, any other work that was going on at the property can continue.
What is Sheet Piling?
As you may well know, there are different types of piling available to suit different construction jobs. One of these types is sheet piling, which has a very specific purpose in construction. Read on to find out more.
Typically, sheet piling is used to create a wall surrounding the area of construction. Depending on the needs of the specific job, this wall can either be temporary or permanent. Sheet piles can be found in a range of heights and thicknesses, and the walls are created by interlocking the piles. Sheet piling has two main purposes: to add protection or hide the construction site.
One of the main purposes of sheet piling is to prevent cave-ins. This is something that can be a risk if a construction job is taking place on soft ground. The sheet piling protects the ground and the construction site, allowing work to continue while reducing the risk of problems. It can also prevent flooding on building sites – something that really matters in a country with so much rain.
This means that sheet piling is very versatile and so it is often used in construction jobs. Metal sheet piling is the most popular variety, but it can also be made out of wood or vinyl depending on the needs of the specific job.
The Benefits of Experienced Pile Driving Contractors
If you find that you need to have piling installed on a building project, it is always best to use experienced pile driving contractors such as MK Piling to carry out the work.
One of the reasons it is so important to use professional pile driving contractors is that there is a range of different piling available. From mini piling to CFA piles, there are different options to suit different jobs. For instance, if noise is an issue on one job it might be possible to use a particular type of piling that cuts down on the noise produced during the process. This is something your pile driving contractors will be able to advise you on.
There are also certain standards that need to be met when installing piling foundations. Any work needs to be signed off by a building inspector and it needs to fall into line with the plans specified for the project by an architect. In order to ensure your project is a success, is completed safely and meets all the relevant regulations, it is vital that you use experienced pile driving contractors.